| Manufacturer+ |
Model |
|
|
Price |
|
MMS4004 |
 |
4 x 4 zone controller. |
|
AMC |
DSP88 |
 |
DSP 88 is a digital signal processor with 8 inputs and 8 outputs, MIC/LINE, balanced audio inputs and Phantom Power. High performance 24 bit AD/DA converters and 95kHz sampling rate, 40 bit floating point DSP engine. All inputs can be matrix mixed and routed to any or all outputs. Easy to use software for configuration and control, using Ethernet, USB or RS232 connections. Processors configuration can be accomplished in real time from the front panel or with a computer from any location, if Ethernet connection is used. 31 band, 1/3 octave graphic equaliser per input and 8 band parametric equaliser per input and output. Dual crossover filters with Bessel, Linkwitz-Riley & Butterworth slopes. 640ms delay per input and output. Input compressors and output limiters. 30 preset and phrase correction. Phoenix input and output connectors. |
|
Australian Monitor |
ICON-CP |
 |
Programmable control panel for Revolution Series. Available in black or white. |
|
BSS |
AC-5S |
 |
Simple analogue wall controller designed for use with BSS Audio Soundweb London devices. The AC-5S contains a single five-position resistor ladder which is useful for source selection or preset recall, and requires one GPI. Therefore, up to 12 AC-5S controllers can connect to a single Soundweb London device, and up to 36 AC-5S controllers can connect to a single BLU-GPX. Available in black or white. |
|
BSS |
AC-V |
 |
Analogue controller with volume control. The AC-V contains a single 47k Ohm logarithmic potentiometer which is useful for volume control, and requires one GPI. Therefore, up to 12 AC-V controllers can connect to a single Soundweb London device, and up to 36 AC-V controllers can connect to a single BLU-GPX. Available in black or white. |
|
BSS |
BLU Telephone Hybrid Card |
|
The Soundweb London Telephone Hybrid Card is designed to populate any of the four card slots on Soundweb London BLU-800, BLU-320, BLU-160 and BLU-120 devices. Enables Soundweb London devices to interface with a standard POTS (aka PSTN or Analog PBX) telephone network. Each card has two analogue inputs which accepts mice or line inputs. |
|
BSS |
BLU-10 |
 |
Programmable controller. Up to 100 control 'pages' of virtually any Soundweb London DSP parameter can be constructed, with the ability to create 'folders' for nested pages. Access to specific pages or folders can be restricted with the used of password protection.
Available in black, white or blue. Please specify when ordering. |
|
BSS |
BLU-100 |
 |
Networked audio processor. Fixed 12-in, 8-out configuration. Configurable Signal Processing. Low latency, fault-tolerant 48 channel digital audio bus. Integrates with BLU-800, BLU-320, BLU-120 and BLU-BOB devices. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. Configuration, control and monitoring from HiQnet London Architect. |
|
BSS |
BLU-101 |
 |
Conferencing processor with Acoustic Echo Cancellation. Fixed configuration of 10 analogue inputs and 8 analogue outputs, an analogue telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. Compatible with the entire Soundweb London range. Configuration, control and monitoring from HiQnet London Architect. |
|
BSS |
BLU-102 |
 |
Conferencing processor with Acoustic Echo Cancellation and Telephone Hybrid card. Fixed configuration of 10 analogue inputs and 8 analogue outputs, an analogue telephone interface, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus. Compatible with the entire Soundweb London range. Configuration, control and monitoring from HiQnet London Architect. |
|
BSS |
BLU-103 |
 |
Conferencing processor with AEC and VoIP. |
|
BSS |
BLU-120 |
 |
Networked audio processor. BLU-Link digital audio bus but no CobraNet™ connectivity or DSP allowing it to function as a BLU-Link break in/out unit. Four I/O slots (I/O cards must be specified separately). |
|
BSS |
BLU-160 |
 |
Networked audio processor. As per BLU-800 with DSP and BLU-Link digital audio bus but no CobraNet™ connectivity. Four I/O slots (I/O cards must be specified separately). |
|
BSS |
BLU-3 |
 |
Rotary fader and a five-way switch. The switch can select system presets while the rotary control could be assigned to act as a zone control. |
|
BSS |
BLU-320 |
 |
Networked audio processor. BLU-Link digital audio bus and CobraNet™ as BLU-800 but no DSP. Configurable through HiQnet London Architect. 12 Control inputs and 6 Logic outputs. 4 I/O slots (I/O cards must be specified separately). |
|
BSS |
BLU-325 |
 |
Specifications as per BLU-320 but with the addition of AVB primary and secondary ports instead of CobraNet. |
|
BSS |
BLU-326 |
 |
I/O Expander with BLU link and Dante™, offering configurable I/O, Dante audio, and a high-bandwidth fault-tolerant digital audio bus. |
|
BSS |
BLU-50 |
 |
4 x 4 half-rack width signal processor with BLU link, offering a fixed configuration of four inputs and four outputs, configurable signal processing, logic processing and BLU link. The device can be powered with the included 12VDC power supply but can accept 12-48VDC via a terminal block connector. The BLU-50 can also be powered with PoE+ via the Ethernet port, allowing the device to be powered, configured and monitored using a single Cat 5e cable. |
|
BSS |
BLU-6 |
 |
Eight way spin pair controller. Eight-way switch plus a pair of spin or up/down buttons, enabling the same level parameter to be mapped onto other controllers preventing a jump in audio level when the control is adjusted. |
|
BSS |
BLU-8 |
 |
HiQnet compatible programmable zone controller capable of controlling a single zone, 4 x zones, or 8 x zones in different modes of operation. A simple control surface and informative visual feedback ensures that non-technical users can be confidant in making changes to an integrated AV system. Available in black or white. |
|
BSS |
BLU-800 |
 |
Networked audio processor. BLU-Link digital audio bus allows 256 channels of fault-tolerant audio transmission. Configurable DSP, 4x more processing power than the original Soundweb London units. CobraNet™. Four I/O slots.
Available with one of the following I/O configurations: 0 in 16 out, 4 in 12 out, 8 in 8 out, 12 in 4 out, 16 in 0 out. Please specify when ordering. |
|
BSS |
BLU-805 |
 |
Specifications as per BLU-800 but with the addition of AVB primary and secondary ports instead of CobraNet. |
|
BSS |
BLU-806 |
 |
Signal processor with BLU link and Dante™, offering configurable I/O, configurable signal processing, Dante audio and a high-bandwidth fault-tolerant digital audio bus. Four card slots facilitate many different I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input card, Analog Output card, Digital Input Card, Digital Output card, AEC Input card, and Telephone Hybrid card. Each card supports four channels. |
|
BSS |
BLU-AEC Input Card |
|
Four input Acoustic Echo Cancellation input card allows Soundweb London to be used in audio conference applications. Compatible with BLU-800, BLU-320, BLU-160 and BLU-120 devices. Acoustic Gain Control and Noise Cancellation. |
|
BSS |
BLU-BIB |
 |
Break-in box / output expander. Provides 8 channels of analogue audio input expansion via the Soundweb London high bandwidth, fault tolerant digital audio bus. 1U, half rack width. DIP switches for Channel Range selection. Front panel Input Gain and Phantom Power control. Front panel lockout for tamper-free operation. 12VDC external power included. |
|
BSS |
BLU-BOB1 |
 |
Break-out box. 8 Channels of analogue output via the Soundweb London digital audio bus. Configured by 6 DIP switches on the rear of the unit. Half rack width. Requires Soundweb PSU, available separately. |
|
BSS |
BLU-BOB2 |
 |
Break-out box. 8 Channels of analogue output via the Soundweb London digital audio bus. Configured by 6 DIP switches on the rear of the unit. Full rack width. Requires Soundweb PSU, available separately. |
|
BSS |
BLU-CARD-IN |
|
I/O cards for Soundweb London. Analogue in. |
|
BSS |
BLU-CARD-OUT |
|
I/O cards for Soundweb London. Analogue out. |
|
BSS |
BLU-DAN |
 |
Dante™ to BLU link bridge. |
|
BSS |
BLU-DIG-IN |
|
I/O cards for Soundweb London. Digital in. |
|
BSS |
BLU-DIG-OUT |
|
I/O cards for Soundweb London. Digital out. |
|
BSS |
BLU-GPX |
 |
Network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analogue control/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo buzzer for audible indication, and locate functionality. |
|
BSS |
BLU-HIF |
 |
Telephone Headset Interface. Allows connection between the headset jack of a VoiP/digital phone to an AEC input and analogue output of a Soundweb London device. Features RJ-22 jack, balanced input and balanced outputs. |
|
BSS |
BLU-RACK |
 |
19" 1U rack mounting kit for up to 2 BLU-BIB or BLU-BOB1 devices. |
|
BSS |
BLU-SI |
 |
32 x 32 interface between Soundcraft SI Series consoles and the BLU Link digital audio bus. The card allows connection to a wide variety of Harman products equipped with a BLU Link interface such as BSS London BLU 800, dbx® PMC or Crown® PIP-BLU interfaces amongst others. BLU Link is a low latency, fault tolerant digital audio bus of 256 channels which using CAT 5e cabling gives a distance of 100m between compatible BLU Link enabled devices. |
|
BSS |
BLU-USB |
 |
USB audio to BLU link interface, allows audio from a PC/Mac to be directly placed on to the BLU link audio bus, enabling easy implementation of softphones for conferencing systems or audio playback directly to/from a computer.
|
|
BSS |
EC-4B |
 |
4 button Ethernet wall controller for use in Harman HiQnet systems, can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown Dci series amplifiers. Contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4B is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect. The four buttons can be pressed for binary parameter control (e.g. mute), preset recall, or source selection. Available in black or white. |
|
BSS |
EC-4BV |
 |
Ethernet controller with 4 buttons and volume control, featuring one push/rotary encoder, one encoder ring, four buttons, and one LCD screen. Contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-4BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect. The buttons, encoder ring, and LCD screen are multi-colour backlit, capable of eight different colours with adjustable intensity. Available in black or white. |
|
BSS |
EC-8BV |
 |
Ethernet controller with 8 buttons and volume control, can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown Dci series amplifiers. Features one push/rotary encoder, one encoder ring, eight buttons, and two LCD screens. The buttons, encoder ring, and LCD screen are multi-colour backlit, capable of eight different colours with adjustable intensity. Contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-8BV is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect. Available in black or white. |
|
BSS |
EC-V |
 |
Ethernet controller with volume control for use in Harman HiQnet systems, can control and monitor parameters within BSS Audio Soundweb London and other HiQnet devices, including Crown DCi series amplifiers. Contains a single Ethernet port for configuration, control, monitoring, and power via PoE. The EC-V is configured via simple drag-and-drop operations within the software application HiQnet Audio Architect. Contains one push/rotary encoder and one encoder ring. The encoder ring is multi-colour backlit, capable of eight different colours with adjustable intensity. Available in black or white. |
|
BSS |
MC-1 |
|
The MC-1 is a Gigabit Media Converter which provides transport up to 10kn (6.2 miles) using 1310nm single mode fibre cable. In use, an MC-1 will be utilised on each end of a two conductor single mode fibre optic cable deployed between two equipment rack locations. Supplied with a wall mount bracket and external power supply. |
|
BSS |
Soundweb Contrio Server - DVS |
 |
The Soundweb Contrio HiQnet Server offers advanced system control and scripting, centralised system management and an integrated media server, utilising Auadinate's Dante Virtual Soundcard. Configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment. In addition to traditional Soundweb London logic objects, Lua-based scripting allows sophisticated application-specific logic functionality to be deployed. System-wide presets and cross-device links within a HiQnet system can be hosted on the HiQnet Server, placing them in a central location on a powerful control device. |
|
Ecler |
ALMA24 |
 |
19" 1U rackmount DSP including EclerCOMM software. 2 inputs and 4 outputs, 24 bits - 48KHz, level, mute and remote control adjust. Phase inversion. Delay time, LP and HP crossovers, and 8 parametric EQ filters per each input and output. Compressors / limiter for inputs and double compressor / limiter (one peak, one RMS) for outputs. Test signal generator. Password locking option. Configuration templates and user presets. |
|
Ecler |
ALMA26 |
 |
ALMA26 is a digital loudspeaker manager including 2 audio inputs and 6
audio oputputs, USB interface and 2 volume remote control ports
(0-10VDC). |
|
Ecler |
DAM 614 |
 |
Audio digital mixer, features include: 6 audio inputs and 4 audio outputs; front panel inputs and outputs level controls; DSP processing; RS-232 connectivity; 4 remote control ports (0-10VDC). |
|
Ecler |
DN44BOB |
 |
4 input and 4 output DANTE (Audio Over IP) Break Out Box. It allows conversion of 4 analogue audio signals into 4 DANTE channels and sends them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals. It includes 4 GPI control ports (0-10VDC) and 4 GPO control ports (NO/NC relays). Can be used together with EclerNet DANTE ready products or as a stand-alone DANTE interface, together with any audio device including audio inputs and/or outputs. |
|
Ecler |
eMIMO1616 |
 |
Ecler Essentials digital audio matrix with 16 input and 16 output analogue channels. |
|
Ecler |
eMPAGE |
 |
Digital paging station (MPAGE16's evolution), compatible with eMIMO1616, MIMO88, MIMO88SG and MIMO1212SG digital matixes. Includes: gooseneck cardioid microphone (removable); 16 zone-selection keys; ALL, CLEAR, and PAGE keys; 2 programmable keys, F1 & F2, for zone-group selection. Text labelling for destination areas by means of programmable electronic ink display.
|
|
Ecler |
MIMO1212SG |
 |
Ecler MIMO1212SG (MIMO1212 Single) is an EclerNet digital audio device that keeps the heart and soul of the standard MIMO88, its main features and its audio quality, to become a simplified and cost-effective version (12x12) of this acclaimed digital matrix. |
|
Ecler |
MIMO88 |
 |
8 in / 8 out digital audio matrix, fully programmable and linkable to a second unit to become a 16x16 matrix, with real routing from any input to any output, management via Ethernet with EclerNet Manager, TP-NET third-party control protocol for the integration to Crestron®, AMX®, Extron®, 8 GPI ports, 8 GPO ports, DSP processing, virtual and physical paging station management, schedule events. Includes RS-232 connection for third party devices and conference software.
|
|
Ecler |
MIMO88SG |
 |
8 In / 8 OUT digital audio matrix, fully programmable, not linkable to a second unit (max. matrix size stays at 8x8). Real routing from any input to any output, management via Ethernet with EclerNet Manager, TP-NET third party control protocol for integration to CRESTRON, AMX, EXTRON, 8 GPI ports, DSP processing, virtual and physical paging station management, scheduled events, feedback killer, etc. Includes RS-232 connection for third party devices. Compatible with WPmSCREEN digital touch-screen controller. |
|
Ecler |
MPAGE16 |
 |
Digital paging console for MIMO 88, 16 zones, SELECT ALL, CLEAR and PAGING keys, 2 x user defined function keys (i.e. for presets). |
|
Ecler |
NXA4-200 |
 |
Powered digital audio manager. Digital matrix, networkable zoning
amplifier, with integrated AMIC DSP and remote EclerNet management. The
NXA4200 delivers 4 x 202W RMS @ 4 ohms. |
|
Ecler |
NXA4-400 |
|
Powered digital audio manager. Digital matrix, networkable zoninig amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA4400 delivers 4 x 400W RMS @ 4 ohms.
|
|
Ecler |
NXA4-80 |
 |
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA480 delivers 4 x 85W RMS @ 4 ohms.
|
|
Ecler |
NXA6-200 |
 |
Powered digital audio manager. Digital matrix, networkable zoning
amplifier, with integrated AMIC DSP and remote EclerNet management. The
NXA6200 delivers 6 x 218W RMS @ 4 ohms. |
|
Ecler |
NXA6-80 |
 |
Powered digital audio manager. Digital matrix, networkable zoning
amplifier, with integrated AMIC DSP and remote EclerNet management. The
NXA680 delivers 6 x 84W RMS @ 4 ohms. |
|
Ecler |
WPaMIX-T |
 |
2 channel micro-mixer in the standardised wall mount format of the WPa series. It allows the mixing of a stereo unbalanced signal (2 x RCA) with a microphone signal (XLR), getting a balanced mono output that can be sent to a preamplifier, amplifier, mixer, digital or analog matrix, etc., thus saving inputs in the receiver device. The MIC input includes a 2 band EQ (BASS, TREBLE) and it can use the talk-over function to override the line signal when the microphone exceeds the talk-over detection threshold. Surface-mount installation box included. |
|
Ecler |
WPaVOL |
 |
Wall panel remote control for one volume management. Compatible with all Ecler 0-10V DC remote control port, like MPA-R, ALMA, MIMO88 / SG, NXA series, CA series, GPA series, etc. Surface-mount installation box included. |
|
Ecler |
WPaVOL-J |
 |
As WPaVOL but with front panel stereo mini-jack connector. |
|
Ecler |
WPaVOL-SR |
 |
Wall panel remote control for one volume management and source or preset selection. Compatible with all Ecler 0-10V DC remote control port, like MPA-R, ALMA, MIMO88 / SG, NXA series, CA series, GPA series, etc. Surface-mount installation box included. |
|
Ecler |
WPaVOL-SR-J |
 |
As WPaVOL-SR but with front panel stereo mini-jack connector. |
|
Ecler |
WPMMIX-T |
 |
2 channel micro-mixer in the standard WPM wall panel format. Unbalanced stereo LINE input with VOL, BASS, and TREBLE controls. Balanced MIC input with phantom power and talkover function. Requires external PSU (WP-PSU model recommended: up to 20 WPMMIXT units could be fed by a single WP-PSU). |
|
Ecler |
WPmPSCRMKIT |
 |
Kit to enable 1 x WPmSCREEN unit to be mounted into a standard width rack cabinet, taking 4RU. |
|
Ecler |
WPmScreen |
 |
The WPmScreen is a remote control panel compatible with all EclerNet products such as MIMO88, NXA and NPA Series. It features a 7" touchscreen and integrated UCP (User Control Panel) client and server hardware.
|
|
Ecler |
WPmSCRFMBOX |
 |
In-wall flush mount installation box for WPmSCREEN remote control panel. |
|
Ecler |
WPMVOL |
 |
Remote wall panel control for one output zone of a MIMO54 unit (zone volume). RJ45 standard connector. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface-mount installation box included. |
|
Ecler |
WPMVOL-IR |
 |
IR to 0-10 V DC interface + IR remote control set. Volume UP, DOWN & MUTE functions converted from IR pulses to VCA voltages. Wall panel blind plate with IR receiver and IR activity LED (green-orange-red). REVO-IR remote control included. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface mount installation box included.
|
|
Ecler |
WPMVOL-SR |
 |
Remote wall panel control for one output zone of a MIMO54 unit (source selection and zone volume). RJ45 standard connector. Volume control compatible with all Ecler 0-10 V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface-mount installation box included. |
|
InterM |
LM8000 |
 |
Mic/Line input plate and volume control. |
|
InterM |
PX8000 |
 |
8 x 8 Audio Matrix. |
|
InterM |
RM8000 |
|
8 zone paging console. |
|
QSC |
CAES4 Type 2 |
 |
I/O card providing 4 channels of AES-3 digital audio with channel pairs configurable as input or output. |
|
QSC |
CAN32 AVB I/O Card |
 |
AVB I/O card, which provides a digital bridge between any AVB edge network and the Q-Sys Eco System. |
|
QSC |
CDN64 |
 |
Dante™ I/O card, which provides a digital bridge between any Dante edge network or input sources (Yamaha mixers, Shure wireless miss, etc.) and the Q-Sys Eco system. The CDN64 will support 64 x 64 channels at 48 KHz sample rate, and 32 x 32 channels at 96 KHz sample rate, and also offers Dante Network redundancy. |
|
QSC |
CIAES16 Kit |
 |
Digital AES card providing 16 channels of AES-3 digital audio input. |
|
QSC |
CIML4 Type 2 |
 |
I/O card providing 4 channels of microphone / line-level analog audio input with 48V phantom power. |
|
QSC |
CIML4-HP Kit |
 |
I/O card providing 4 channels of microphone / line-level analog audio input with high performance pre-amplifiers and 48V phantom power. |
|
QSC |
CODP4 Kit |
 |
I/O card providing 4 channels (2 Dataports) for connection to DataPort equipped QSC amplifiers. |
|
QSC |
COL4 Type 2 |
 |
I/O card providing 4 channels of balanced, line-level analog audio output. |
|
QSC |
Core 1100 |
 |
The new Core 1100 provides up to 256 x 256 low-latency network audio network channels and 96 x AEC processing channels, using a pair of the latest generation XEON 4-core processors coupled to server-grade cooling towers. Additional features include super-sized, low-speed fans for maximum front-to-rear airflow with minimal fan noise, and a premium field-serviceable power supply. |
|
QSC |
Core 110F |
 |
Digital audio core processor. The Q-SYS™ Core 110F is the latest addition to the Q-SYS Core family, providing a solution for small, single room projects up to the largest Enterprise scale deployments. |
|
QSC |
Core 3100 |
 |
The new Core 3100 provides up to 512 x 512 low-latency network audio network channels and 192 x AEC processing channels, using a pair of the latest generation XEON 8-core processors coupled to server-grade cooling towers. Additional features include super-sized, low-speed fans for maximum front-to-rear airflow with minimal fan noise, and a premium field-serviceable power supply. |
|
QSC |
Core 500i |
 |
The Core 500i Integrated Core has the capability of directly accommodating eight Q-SYS input and/or output cards for a total onboard channel capacity of 32 channels (more if AES or CobraNet™ cards are used). Channel count may be further expanded by the addition of Q-SYS I/O Frames and other peripheral devices. Network Channel capability: 128 Flex Channels; AEC count: 32. |
|
QSC |
Core 510i |
 |
The Q-SYS™ Core 510i processor is an audio, video and control processing system that leverages Intel™ CPUs and motherboards as well as a dedicated Linux™ realtime operating system developed by QSC to provide class-leading capabilities for AV systems of any scale. Features include 8 onboard I/O card slots that can be populated with any combination of Q-SYS Type-II I/O card allowing diverse connectivity options. |
|
QSC |
Core 5200 |
 |
The Core 5200 processor is the first professional AV&C solution available that combines commercial off-the-shelf (COTS) server technology with the scalability of a purpose built AV&C real-time operating system (RTOS), thereby offering scalability and IT integration capabilities unmatched by any other audio, video or control solution. Features include hot-swappable PSU's, Del IDRAC remote monitoring and a pre-installed 960Gb SSD media drive.
|
|
QSC |
CR1 KIT |
|
Card riser (includes rear plate) for stacking and covering unused card slots below I/O cards. |
|
QSC |
CTEL4 |
 |
Q-Sys Dante Bridge Card, 64 x 64. |
|
QSC |
CXD4.2Q |
 |
Multi-channel Network Processing Amplifier for seamless Q-Sys integration. 4 channels, 400W per channel at 8Ω, 400W per channel at 4Ω, 325W per channel at 2Ω. |
|
QSC |
CXD4.3Q |
 |
Multi-channel Network Processing Amplifier for seamless Q-Sys integration. 4 channels, 625W per channel at 8Ω, 625W per channel at 4Ω, 625W per channel at 2Ω, 500W per channel direct drive 100V, 625W per channel direct drive 70V. |
|
QSC |
CXD4.5Q |
 |
Multi-channel Network Processing Amplifier for seamless Q-Sys integration. 4 channels, 1150W per channel at 8Ω, 1250W per channel at 4Ω, 625W per channel at 2Ω, 1000W per channel direct drive 100V, 1250W per channel direct drive 70V. |
|
QSC |
DAB-801 |
 |
DataPort Amplifier backup panel, 8 channels, provides amplifier redundancy when used with Q-Sys DataPort I/O, 4 RU. |
|
QSC |
DDI-11 |
|
Customisable DataPort interface, provides an easy way to exploit the features of the DataPort without using Q-SYS, QSControl or an accessory. In addition, the DDI-11 can be used on a DataPort outputs of a Basis or Q-SYS I/O card to provide access to the audio signals. |
|
QSC |
DDI-3 |
|
Interface module, converts a QSC amplifier's DataPort to an 8-position terminal block, providing convenient access to the pins of the amplifier's DataPort. |
|
QSC |
DPC-1 |
|
DataPort cable, HD15 connector, 1ft length. |
|
QSC |
DPC-10 |
|
DataPort cable, HD15 connector, 10ft length. |
|
QSC |
DPC-100 |
|
DataPort cable, HD15 connector, 100ft length. |
|
QSC |
DPC-2 |
|
DataPort cable, HD15 connector, 2ft length. |
|
QSC |
DPC-20 |
|
DataPort cable, HD15 connector, 20ft length. |
|
QSC |
DPC-3 |
|
DataPort cable, HD15 connector, 3ft length. |
|
QSC |
DPC-4 |
|
DataPort cable, HD15 connector, 4ft length. |
|
QSC |
DPC-5 |
|
DataPort cable, HD15 connector, 5ft length. |
|
QSC |
DPC-6 |
|
DataPort cable, HD15 connector, 6ft length. |
|
QSC |
DPC-75 |
|
DataPort cable, HD15 connector, 75ft length. |
|
QSC |
DSP322ua |
 |
Configurable DSP, 8 analog universal (mic/line) inputs via euro style connectors, 8 analog outputs via euro style connectors. |
|
QSC |
I/O 22 |
 |
Q-Sys peripheral with PoE (Power over Ethernet) that provides 2 mic/lines, 2 line outputs, and one 10W speaker output. |
|
QSC |
I/O Frame |
 |
1 RU I/O frame, accommodates four slot cards, dual Ethernet ports for network redundancy, and 1 GPIO port. |
|
QSC |
I/O USB Bridge |
 |
The Q-SYS I/O-USB Bridge is the latest addition to the Q-SYS platform that allows users to integrate networked Q-SYS conference room camera video alongside industry leading audio processing into soft-codec applications via USB connection, all without installing special drivers. |
|
QSC |
I/O-8 Flex |
 |
The Q-SYS™ I/O-8 Flex Channel Expander adds a multitude of expansion capabilities to the Q-SYS platform in a compact, PoE+ capable networked peripheral that can be remotely located wherever the I/O is required. Features include 8 channels of "flex channels" (a QSC exclusive technology), which allows each channel to be configured via software as either a Mic/Line input with phantom power, or a Line Level output. Additionally, the I/O-8 Flex Channel Expander offers Audio-to-USB bridging for integration with soft codec applications running on any host PC as well as control connectivity via GPIO and RS232. |
|
QSC |
IT-8400 |
|
Isolation Output Transformer Panel, 25/70/100V, 8 channels, 400W/Ch, rack mount, 4RU. |
|
QSC |
M2-MD-L |
|
Small media drive for Core 510i - provides a minimum of 1200 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
M2-MD-M |
|
Small media drive for Core 510i - provides a minimum of 260 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
M2-MD-S |
|
Small media drive for Core 510i - provides a minimum of 130 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
MD-CORE110 |
|
Media Drive for Core 110F - provides a minimum of 200 hours (128GB) of audio storage (24-bit, 48 kHz mono WAV file). |
|
QSC |
MD-L |
|
Large media drive for Core DSP's - provides a minimum of 1200 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
MD-M |
|
Medium media drive for Core DSP's - provides a minimum of 260 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
MD-S |
|
Small media drive for Core DSP's - provides a minimum of 130 hours of audio storage (WAV, MP3 or FLAC). |
|
QSC |
MTP-128 Kit |
|
Multi-track playback option for Core DSP's - up to 128 channels (requires a Media Drive installed to activate). |
|
QSC |
MTP-32 Kit |
|
Multi-track playback option for Core DSP's - up to 32 channels (requires a Media Drive installed to activate). |
|
QSC |
MTP-64 Kit |
|
Multi-track playback option for Core DSP's - up to 64 channels (requires a Media Drive installed to activate). |
|
QSC |
NAC-100 |
 |
Network audio controller for QSControl.net systems; colour graphic display, POE (Power Over Ethernet). Available in black or white. |
|
QSC |
PS-1600H/G |
 |
Q-Sys 16-button wall mounted page station, available with either handheld (H) or gooseneck (G) microphone. |
|
QSC |
PS-1650H/G |
 |
Q-Sys 16-button Command Code (A-P) wall mounted page station, available with either handheld (H) or gooseneck (G) microphone. |
|
QSC |
PS-ACC |
|
Q-Sys Gooseneck Page Station podium mounting flange accessory. |
|
QSC |
PS-RGM |
|
Spare gooseneck microphone for the PS-1600/1650G. |
|
QSC |
PS-RHM |
|
Spare handheld microphone for the PS-1600/1650H. |
|
QSC |
PS-X |
 |
Q-Sys Page Station Expander, handheld microphone. |
|
QSC |
PTL-1 |
 |
Pilot tone load for Q-Sys. |
|
QSC |
PTZ-12x72 |
 |
The PTZ-12x72 conference camera integrates with the Q-SYS™ platform and Q-SYS bridging peripherals to deliver professional quality conference video feeds alongside industry leading audio processing for small, medium and large sized meeting rooms for utilising soft-codec conferencing or computer-based capture. The PTZ-12x72 features a 12x optical zoom, and 72º horizontal Field of View (FoV). |
|
QSC |
PTZ-20x60 |
 |
The PTZ-20x60 conference camera integrates with the Q-SYS™ platform and Q-SYS bridging peripherals to deliver professional quality conference video feeds alongside industry leading audio processing for small, medium and large sized meeting rooms for utilising soft-codec conferencing or computer-based capture. The PTZ-20x60 features a 20x optical zoom, and 60º horizontal Field of View (FoV). |
|
QSC |
PTZ-CMB1 |
|
Ceiling mounting bracket for PTZ conference cameras. |
|
QSC |
RP1 KIT |
|
Rear plate for covering unused card slots above I/O cards (4 pack). |
|
QSC |
SC-28 |
 |
2-in, 8-out digital system controller. |
|
QSC |
SL-QSE-110P |
|
Scripting Engine Software License (Perpetual) for the Core 110. |
|
QSC |
SL-QSE-510P |
|
Scripting Engine Software License (Perpetual) for the Core 510. |
|
QSC |
SL-QUD-110P |
|
UCI Deployment Software License (Perpetual) for the Core 110. |
|
QSC |
SL-QUD-510P |
|
UCI Deployment Software License (Perpetual) for the Core 510. |
|
QSC |
TSC-116T-G2 |
 |
Optional table top stand for TSC-116W-G2. Black. |
|
QSC |
TSC-116TW-G2 |
 |
Q-SYS touch screen controller, with viewable screen dimensions of 11.6" (diagonal), with table top stand. Black. |
|
QSC |
TSC-116W-G2 |
 |
In-wall Q-SYS touch screen controller, with viewable screen dimensions of 11.6" (diagonal). Black. |
|
QSC |
TSC-47W-G2 |
 |
In-wall Q-SYS touch screen controller, with viewable screen dimensions of 4.7" (diagonal). Black. |
|
QSC |
TSC-55W-G2 |
 |
In-wall Q-SYS touch screen controller, with viewable screen dimensions of 5.5" (diagonal). Black. |
|
QSC |
TSC-7-PS |
|
Optional PSU for Q-Sys 7" Touch Screens. |
|
QSC |
TSC-7t |
 |
7" Touch Screen Tabletop Controller with Bluetooth for Q-Sys systems - operates on PoE or external DC power source. |
|
QSC |
TSC-7w |
 |
7" Touch Screen Wall Mount Controller for Q-Sys systems - operates on PoE or external power source. |
|
QSC |
TSC-80T-G2 |
|
Optional table top stand for TSC-80W-G2. Black. |
|
QSC |
TSC-80TW-G2 |
|
Q-SYS touch screen controller, with viewable screen dimensions of 8" (diagonal) with table top stand. Black. |
|
QSC |
TSC-80W-G2 |
 |
In-wall Q-SYS touch screen controller, with viewable screen dimensions of 8" (diagonal). Black. |
|
QSC |
WCP-1 |
|
Wall control with rotary pot. |
|
QSC |
WCP-2 |
|
Wall control with Rotary BCD switch. |
|
Samson Audio |
SXD3000 |
 |
Samson's SXD3000 Power Amplifier
combines impressive power with advanced DSP technology, pushing the
boundaries of value, performance and reliability. With a full-featured
interface for precise control over DSP parameters, the SXD3000 is an
ideal choice for front of house engineers, installers and anyone else
looking for a reliable power distribution setup. |
|
Samson Audio |
SXD5000 |
 |
Samson's SXD5000 Power Amplifier combines impressive power with advanced DSP technology, pushing the boundaries of value, performance and reliability. With a full-featured interface for precise control over DSP parameters, the SXD5000 is an ideal choice for front of house engineers, installers and anyone else looking for a reliable power distribution setup.
|
|
Shure |
P300 |
 |
Audio conferencing processor offering IntelliMix DSP algorithms optimised for audio / video conferencing applications, featuring 8 channels of acoustic echo cancellation, noise reduction and automatic gain control to ensure a high-quality audio experience. |
|
Xilica |
Centro-SM1 |
|
The Centro-SM1 site manager makes available to Neutrino and Uno processors the following functionality: Browser Control (control Neutrino and Uno processors from any smart phone or tablet); Third Party Control Interpreter (simplifies programming of third party control systems); RS-232 Connection; Scheduler (date and time event scheduling); System Back-Up. 1U. |
|
Xilica |
ETH/485 |
 |
Bi-directional Ethernet to RS232 third party interface, for Neutrino, Solaro and Uno series. |
|
Xilica |
NeuPanel Mini-K1 |
|
A single, programmable Level Control on a 2-gang size aluminium panel with power and network status LED's, volume level LED ladder, and a label slot with a plastic cover. External power supply included (or power over Ethernet cable using a POE router or switch). Available in black or white. |
|
Xilica |
NeuPanel Mini-K4 |
 |
4 programmable, selectable Level controls on a 2-gang size aluminum panel with power and network status LED’s, volume level
LED ladder, and label slots with a plastic cover. External power supply included (or power over Ethernet cable using a POE
router or switch). Available in black or white. |
|
Xilica |
NeuPanel Mini-S4 |
 |
4 programmable, selectable On/Off push buttons on a 2-gang size aluminium panel with power and network status LED's and label slots with plastic covers. External power supply included (or power over Ethernet cable using a POE router or switch). Available in black or white. |
|
Xilica |
NeuPanel Mini-S4K1 |
 |
4 programmable, selectable On/Off push buttons, plus 1 independent, programmable Level control on a 2-gang size aluminum panel with power and network status LED’s, volume level LED ladder, and label slots with a plastic cover. External power supply included (or power over Ethernet cable using a POE router or switch). Available in black or white. |
|
Xilica |
NeuPanel Mini-S8 |
 |
8 programmable, selectable On/Off push buttons on a 2-gang size aluminium panel with power and network status LED's and label slots with plastic covers. External power supply included (or power over Ethernet cable using a POE router or switch). Available in black or white.
|
|
Xilica |
NeuPanel-Touch 7-SM |
 |
7" Touchscreen controller for Neutrino and Uno series processors. |
|
Xilica |
NeuPanel-Touch 7-SM Bracket |
|
Optional 19" 3U bracket for NeuPanel-Touch 7-SM. |
|
Xilica |
NeuPanel-Touch 7-SM W-MT |
|
Optional wall mount kit for NeuPanel-Touch 7-SM. |
|
Xilica |
Neutrino A0808 |
 |
The Neutrino series offer a range of drag & drop configured, DHCP enabled digital processors with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. The Neutrino A0808 has 8 inputs and 8 outputs.
|
|
Xilica |
Neutrino A0808-D |
|
As Neutrino A0808 but with 8 AES/EBU. |
|
Xilica |
Neutrino A0808-N |
|
As Neutrino A0808 but with Network Dante I/P. |
|
Xilica |
Neutrino A0808-ND |
|
As Neutrino A0808 but with Network Dante I/P and AES/IBU. |
|
Xilica |
Neutrino A0816 |
 |
The Neutrino series offer a range of drag & drop configured, DHCP enabled digital processors with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. The Neutrino A0816 has 8 inputs and 16 outputs. |
|
Xilica |
Neutrino A0816-N |
|
As Neutrino A0816 but with Network Dante I/P. |
|
Xilica |
Neutrino A1608 |
 |
The Neutrino series offer a range of drag & drop configured, DHCP enabled digital processors with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. The Neutrino A1608 has 16 inputs and 8 outputs. |
|
Xilica |
Neutrino A1608-AEC |
|
As Neutrino A1608 but with 8 channel Acoustic Echo Cancellation. |
|
Xilica |
Neutrino A1608-AEC-N |
|
As Neutrino A1608 but with 8 channel Acoustic Echo Cancellation and Dante. |
|
Xilica |
Neutrino A1608-N |
|
As Neutrino A1608 but with Network Dante I/P. |
|
Xilica |
Neutrino A1616 |
 |
The Neutrino series offer a range of drag & drop configured, DHCP enabled digital processors with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. The Neutrino A1616 has 16 inputs and 16 outputs. |
|
Xilica |
Neutrino A1616-D |
|
As Neutrino A1616 but with 8 AES/EBU. |
|
Xilica |
Neutrino A1616-N |
|
As Neutrino A1616 but with Network Dante I/P. |
|
Xilica |
Neutrino A1616-ND |
|
As Neutrino A1616 but with Network Dante I/P and AES/IBU. |
|
Xilica |
Patch Female |
 |
Patch panel, 19'/1U, for Neutrino, Uno and Rio series: 8 x XLR Female/Phoenix connectors, 1m cable. |
|
Xilica |
Patch Male |
 |
Patch panel, 19'/1U, for Neutrino, Uno and Rio series: 8 x XLR Male/Phoenix connectors, 1m cable. |
|
Xilica |
Patch-XP |
|
19 inch Patch Panel, 2U, with 8 x XLR inputs and 8 x XLR outputs. |
|
Xilica |
Rio R1616-N |
 |
The Rio R1616-N is a 1U device with front panel audio metering and dual RJ45 Dante connectors and 16x16 analogue I/O connections on the rear of the unit. On the digital side, it provides 16x16 I/O channels of Dante Network Audio via a single CAT5e/6 cable (plus a redundant path). For analogue, it provides 16 balanced, selectable, Mic/Line inputs and 16 balanced line outputs on Euro/Phoenix style connectors. |
|
Xilica |
Rio R1616X-N XLR edition |
 |
The Rio-R1616X-N XLR edition is a 2U device with front panel audio metering, dual RJ45 Dante connectors and 16 x 16 analog I/O XLR connections. On the digital side of Rio, the Rio-R1616X-N provides 16 x 16 I/O channels of Dante Network Audio via a single CAT5e/6 cable (plus a redundant path). On the analog side, the Rio-R1616X-N provides 16 balanced, selectable, Mic/Line inputs and 16 balanced line outputs on XLR connectors. Rio operates as a native Dante device with automatic device discovery and clock configuration using standard Ethernet hardware. High quality A/D and D/A converters ensure superb audio quality.
|
|
Xilica |
Rio R22-P |
 |
1/4 rack chassis size Dante interface device with 2x2 analog Inputs/Outputs + 2x2 Dante Inputs/Outputs. Mounting brackets included. |
|
Xilica |
Rio R22-WP-M |
 |
2x2 analogue Inputs/Outputs + 2x2 Dante Inputs/Outputs on a 2 gang sized flush or surface mount wall plate (surface mount back box included). Available in black or white. |
|
Xilica |
Rio R22-WP-X |
 |
2x2 analogue Inputs/Outputs + 2x2 Dante Inputs/Outputs on a 2 gang sized flush or surface mount wall plate (surface mount back box included). Available in black or white. |
|
Xilica |
Solaro QR-2AES-I |
|
Modular plug-in card for Solaro QR: 2 channel AES/EBU digital input. |
|
Xilica |
Solaro QR-2AES-O |
|
Modular plug-in card for Solaro QR: 2 channel AES/EBU digital output. |
|
Xilica |
Solaro QR-2L-O |
|
Modular plug-in card for Solaro QR: 2 channel line output. |
|
Xilica |
Solaro QR-2ML-I |
|
Modular plug-in card for Solaro QR: 2 channel mic/line input, 48V phantom. |
|
Xilica |
Solaro QR-4GPIO-I |
|
Modular plug-in card for Solaro QR: 4 channel GPIO input. |
|
Xilica |
Solaro QR-4GPIO-O |
|
Modular plug-in card for Solaro QR: 4 channel GPIO output. |
|
Xilica |
Solaro QR-AEC |
|
Max of 12 AEC mic inputs. Soft key activated. |
|
Xilica |
Solaro QR-Chassis |
 |
Quarter rack 1RU modular chassis with 8 user-configured rear card slots. 4x4 Dante network audio included. Front panel power, Ethernet, and audio indicators. Front panel Ethernet and Dante RJ45 connectors and external power supply input. Can be PoE powered, external power supply included. |
|
Xilica |
Solaro QR-RMKIT |
|
Rack mount kit to mount 2 x QR-Chassis side by side in a 1RU 19" rack space. |
|
Xilica |
Solaro QR-VOIP |
|
VOIP interface for Solaro-QR. |
|
Xilica |
Uno U0808 |
 |
Uno processors are DHCP enabled network devices with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. Simply download a pre-designed schematic app from our Uno apps library into Uno. There is a DSP schematic app for just about every application and with input from our users our web site apps library will continue to grow, future-proofing your Uno hardware investment. The Uno U0808 has 8 inputs and 8 outputs.
|
|
Xilica |
Uno U0808-D |
 |
As U0808 but includes AES/EBU digital I/O. |
|
Xilica |
Uno U0808-N |
|
As Uno U0808 but with Dante Network Card. |
|
Xilica |
Uno U0808-ND |
|
As U0808 but includes Dante Network Audio and AES/EBU digital I/O. |
|
Xilica |
Uno U0816 |
 |
Uno processors are DHCP enabled network devices with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. Simply download a pre-designed schematic app from our Uno apps library into Uno. There is a DSP schematic app for just about every application and with input from our users our web site apps library will continue to grow, future-proofing your Uno hardware investment. The Uno U0816 has 8 inputs and 16 outputs. |
|
Xilica |
Uno U0816-N |
|
As Uno U0816 but with Dante Network Card. |
|
Xilica |
Uno U1608 |
 |
Uno processors are DHCP enabled network devices with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. Simply download a pre-designed schematic app from our Uno apps library into Uno. There is a DSP schematic app for just about every application and with input from our users our web site apps library will continue to grow, future-proofing your Uno hardware investment. The Uno U1608 has 16 inputs and 8 outputs. |
|
Xilica |
Uno U1608-AEC |
|
As Uno U1608 but with AEC (Acoustic Echo Cancellation). |
|
Xilica |
Uno U1608-AEC-N |
 |
As Uno U1608 but with AEC (Acoustic Echo Cancellation) and Dante. |
|
Xilica |
Uno U1608-N |
|
As Uno U1608 but with Dante Network Card. |
|
Xilica |
Uno U1616 |
 |
Uno processors are DHCP enabled network devices with Mic/Line input selection per input, 48V phantom power, and premium grade mic pre-amps. Simply download a pre-designed schematic app from our Uno apps library into Uno. There is a DSP schematic app for just about every application and with input from our users our web site apps library will continue to grow, future-proofing your Uno hardware investment. The Uno U1616 has 16 inputs and 16 outputs. |
|
Xilica |
Uno U1616-D |
 |
As U1616 but includes AES/EBU digital I/O. |
|
Xilica |
Uno U1616-N |
|
As Uno U1616 but with Dante Network Card. |
|
Xilica |
Uno U1616-ND |
|
As U1616 but includes Dante Network Audio and AES/EBU digital I/O. |
|
Xilica |
X-Box |
|
Installation box for X-Panel. |
|
Xilica |
X-Ethernet |
|
Ethernet plug-in card for XP and XD series. |
|
Xilica |
X-Panel |
 |
Fully programmable wall control panel, compatible with Neutrino, XP, and XD series processors. Features include: 32 fully programmable menu's; Programmable main menu description; 2 x 16 character LCD display; up to 63 X-Panels in one network; Standard Ethernet CAT-5 interface; Powered by POE compatible router switcher or external power supply. Available in black or white. |
|
Xilica |
XA-2040 |
 |
The XA-Series DSP is a low-cost, fixed architecture, fully programable audio system processor.
Inputs can be matrix mixed/routed to any or all outputs; USB and RS232 connectivity
for configuration, control and software/firmware updates is standard; Processor
configuration can be accomplished in real time from the front panel or with a computer
running our easy to use XConsole software GUI (download XConsole at www.xilica.com). The XA-2040 has 2 inputs and 4 outputs. |
|
Xilica |
XA-2060 |
 |
The XA-Series DSP is a low-cost, fixed architecture, fully programable audio system processor. Inputs can be matrix mixed/routed to any or all outputs; USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com). The XA-2060 has 2 inputs and 6 outputs. |
|
Xilica |
XA-4080 |
 |
The XA-Series DSP is a low-cost, fixed architecture, fully programable audio system processor. Inputs can be matrix mixed/routed to any or all outputs; USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com). The XA-4080 has 4 nputs and 8 outputs. |
|
Xilica |
XD-4080 |
 |
The XD-Series DSP are fixed architecture, fully programable, digital, audio system
processors. Inputs can be matrix mixed/routed to any or all outputs; Our standard
signal processing functions (as listed to the left) are joined by the addition of high
performance FIR Crossover Filters and AES/EBU Digital Inputs and Outputs; Ethernet,
USB and RS232 connectivity for configuration, control and software/firmware updates
is standard; Processor configuration can be accomplished in real time from the front
panel or with a computer running our easy to use XConsole software GUI (download
XConsole at www.xilica.com); And with the Ethernet connection and a basic wired
or wireless router the XConsole GUI can control individual or multiple XD-Series
processors from any location. The XD-4080 has 4 inputs and 8 outputs. |
|
Xilica |
XD-4080M |
|
The XD-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Our standard signal processing functions (as listed to the left) are joined by the addition of high performance FIR Crossover Filters and AES/EBU Digital Inputs and Outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XD-Series processors from any location. The XD-4080M has 4 inputs and 8 outputs with mic/line inputs. |
|
Xilica |
XD-8080 |
 |
The XD-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Our standard signal processing functions (as listed to the left) are joined by the addition of high performance FIR Crossover Filters and AES/EBU Digital Inputs and Outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XD-Series processors from any location. The XD-8080 has 8 inputs and 8 outputs. |
|
Xilica |
XD-8080M |
|
The XD-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Our standard signal processing functions (as listed to the left) are joined by the addition of high performance FIR Crossover Filters and AES/EBU Digital Inputs and Outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XD-Series processors from any location. The XD-8080M has 8 inputs and 8 outputs with mic/line inputs. |
|
Xilica |
XP-2040 |
 |
The XP-Series DSP are fixed architecture, fully programable, digital, audio system
processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB
and RS232 connectivity for configuration, control and software/firmware updates is
standard; Processor configuration can be accomplished in real time from the front
panel or with a computer running our easy to use XConsole software GUI (download
XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or
wireless router the XConsole GUI can control individual or multiple XP-Series (and
XD series) processors from any location. The XP-2040 has 2 inputs and 4 outputs (with Ethernet). |
|
Xilica |
XP-2040M |
|
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-2040 has 2 inputs and 4 outputs with mic/line inputs. |
|
Xilica |
XP-3060 |
 |
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-3060 has 3 inputs and 6 outputs (with Ethernet). |
|
Xilica |
XP-3060M |
|
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-3060 has 3 inputs and 6 outputs with mic/line inputs. |
|
Xilica |
XP-4080 |
 |
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-4080 has 4 inputs and 8 outputs (with Ethernet). |
|
Xilica |
XP-4080M |
|
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-4080 has 4 inputs and 8 outputs with mic/line inputs. |
|
Xilica |
XP-8080 |
 |
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-8080 has 8 inputs and 8 outputs (with Ethernet). |
|
Xilica |
XP-8080M |
|
The XP-Series DSP are fixed architecture, fully programable, digital, audio system processors. Inputs can be matrix mixed/routed to any or all outputs; Ethernet, USB and RS232 connectivity for configuration, control and software/firmware updates is standard; Processor configuration can be accomplished in real time from the front panel or with a computer running our easy to use XConsole software GUI (download XConsole at www.xilica.com); And with the Ethernet connection and a basic wired or wireless router the XConsole GUI can control individual or multiple XP-Series (and XD series) processors from any location. The XP-8080 has 8 inputs and 8 outputs with mic/line inputs. |
|
Yamaha CA |
AD8HR |
 |
8 channel A/D converter with head amplifier remote control. |
|
Yamaha CA |
CP1SF |
 |
Wall-mountable remote control panel for GPI control with 1 switch and 1 fader. |
|
Yamaha CA |
CP4SF |
 |
Wall-mountable remote control panel for GPI control with 4 switches and 4 faders. |
|
Yamaha CA |
CP4SW |
 |
Wall-mountable remote control panel for GPI control with 4 switches. |
|
Yamaha CA |
DA824 |
 |
8 channel D/A converter. |
|
Yamaha CA |
DCH8 |
 |
Digital Control Hub, divides the control line from host devices such as Yamaha MTX/MRX series into 8 lines. |
|
Yamaha CA |
DCP1V4S |
 |
1 volume & 4 switch equipped wall mount control panel for the MTX series, with easy connection by CAT5 carrying RS485 + power. Maximum 8 DCP's can be connected to 1 MTX series. |
|
Yamaha CA |
DCP4S |
 |
4 switch wall mount control panel for the MTX series, with easy connection by CAT5 carrying RS485 + power. Maximum 8 DCP's can be connected to 1 MTX series. |
|
Yamaha CA |
DCP4V4S |
 |
4 volume & 4 switch equipped wall mount control panel for the MTX series, with easy connection by CAT5 carrying RS485 + power. Maximum 8 DCP's can be connected to 1 MTX series. |
|
Yamaha CA |
DME24N (V 3.5+) |
 |
Digital mixing engine, 8 x analog I/O, 1 MY-card slot, max. 24 I/O, DME Designer software included. |
|
Yamaha CA |
DME64N (V3.5+) |
 |
Digital mixing engine, 4 MY card slots, max 64 I/O, DME designer software included. |
|
Yamaha CA |
EXI8 |
 |
8 channel input expander which converts analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXI8's preamps can be controlled remotely from a MTX/MRX series processor via Ethernet cable. |
|
Yamaha CA |
EXO8 |
 |
Output expander featuring 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX / MRX series processors via YDIF. |
|
Yamaha CA |
ICP1 |
 |
Intelligent Control Panel for DME24N and DME64N. |
|
Yamaha CA |
MLA8 |
|
8 channel mic/line preamplifier. |
|
Yamaha CA |
MRX7D |
 |
Signal processor that offers outstanding processing for a broad range of audio installations. Features include: 8 mono, 2 stereo, 8 analog out, YDIF, 64 channel Dante, MY card slot, Dugan Automaker, Echo Canceller. |
|
Yamaha CA |
MTX3 |
 |
Matrix processor equipped with a variety of programmable features designed to maximise the performance of sound systems in commercial installations. |
|
Yamaha CA |
MTX5-D |
 |
Matrix processor offering expandability and format compatibility with an on-board Dante network port and MY card slot. |
|
Yamaha CA |
MY4-AEC |
 |
4 channel acoustic echo cancellation card for remote conferencing. |
|
Yamaha CA |
MY8-SDI-ED |
 |
8 channel HD-SDI Embed/De-embed card for HD video systems, 4 x BNC. |
|
