dsp processors

DSP or Digital Signal Processors are essentially computers in a rackmounting case with audio inputs and outputs. Audio signals are fed in, processed and then fed back out. Processing can include mixing functions or combining of audio signals, frequency spectrum equalisation, routing and control of volume levels. Some units also include acoustic echo cancellation required for distance conferencing to eliminate any voice echo.

Other advantages of using DSP processors are that they will easily integrate with control systems and allow the programmer to setup “snapshots” for instant recall of different system settings.

 


Please click the headings to re-order the product listing.

Manufacturer Model- Price

Ecler

ALMA24

ALMA24
19" 1U rackmount DSP including EclerCOMM software. 2 inputs and 4 outputs, 24 bits - 48KHz, level, mute and remote control adjust. Phase inversion. Delay time, LP and HP crossovers, and 8 parametric EQ filters per each input and output. Compressors / limiter for inputs and double compressor / limiter (one peak, one RMS) for outputs. Test signal generator. Password locking option. Configuration templates and user presets.

£678.00


Ecler

ALMA26

ALMA26
ALMA26 is a digital loudspeaker manager including 2 audio inputs and 6 audio oputputs, USB interface and 2 volume remote control ports (0-10VDC).

£722.00


Ecler

DAM 614

DAM 614
Audio digital mixer, features include: 6 audio inputs and 4 audio outputs; front panel inputs and outputs level controls; DSP processing; RS-232 connectivity; 4 remote control ports (0-10VDC).

£696.00


Ecler

DN44BOB

DN44BOB
4 input and 4 output DANTE (Audio Over IP) Break Out Box. It allows conversion of 4 analogue audio signals into 4 DANTE channels and sends them into an Ethernet LAN, as well as to take 4 DANTE channels from the Ethernet network and convert them to analogue audio signals. It includes 4 GPI control ports (0-10VDC) and 4 GPO control ports (NO/NC relays). Can be used together with EclerNet DANTE ready products or as a stand-alone DANTE interface, together with any audio device including audio inputs and/or outputs.

£761.00


Ecler

MIMO1212SG

MIMO1212SG
Ecler MIMO1212SG (MIMO1212 Single) is an EclerNet digital audio device that keeps the heart and soul of the standard MIMO88, its main features and its audio quality, to become a simplified and cost-effective version (12x12) of this acclaimed digital matrix.

£1,433.00


Ecler

MIMO88

MIMO88
8 in / 8 out digital audio matrix, fully programmable and linkable to a second unit to become a 16x16 matrix, with real routing from any input to any output, management via Ethernet with EclerNet Manager, TP-NET third-party control protocol for the integration to Crestron®, AMX®, Extron®, 8 GPI ports, 8 GPO ports, DSP processing, virtual and physical paging station management, schedule events. Includes RS-232 connection for third party devices and conference software.

£1,746.00


Ecler

MIMO88SG

MIMO88SG
8 In / 8 OUT digital audio matrix, fully programmable, not linkable to a second unit (max. matrix size stays at 8x8). Real routing from any input to any output, management via Ethernet with EclerNet Manager, TP-NET third party control protocol for integration to CRESTRON, AMX, EXTRON, 8 GPI ports, DSP processing, virtual and physical paging station management, scheduled events, feedback killer, etc. Includes RS-232 connection for third party devices. Compatible with WPmSCREEN digital touch-screen controller.

£1,133.00


Ecler

MPAGE16

MPAGE16
Digital paging console for MIMO 88, 16 zones, SELECT ALL, CLEAR and PAGING keys, 2 x user defined function keys (i.e. for presets).

£461.00


Ecler

NXA4-200

NXA4-200
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA4200 delivers 4 x 202W RMS @ 4 ohms.

£1,024.00


Ecler

NXA4-400

NXA4-400
Powered digital audio manager. Digital matrix, networkable zoninig amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA4400 delivers 4 x 400W RMS @ 4 ohms.

£1,599.00


Ecler

NXA4-700

NXA4-700
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. 4/6 analogue inputs routable to any output. 4/6 volume remote control ports, assignable to one or various channels. High end A/D and D/A codecs. Assignable and enable/disable function on front knobs. Independent channel working modes: SINGLE mode, BRIDGE and PARALLEL. Eco-friendly Class-D amplifiers. Silent cooling through convection not fan. Integrated anti-clip system. RJ45 (Ethernet) remote control port. RS-232 control interface. Auto stand-by function. Euroblock type input, output and volume remote control connections. 2RU. The NXA4-700 delivers 4 x 420W RMS @ 4 ohms.

£2,019.00


Ecler

NXA4-80

NXA4-80
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA480 delivers 4 x 85W RMS @ 4 ohms.

£769.00


Ecler

NXA6-200

NXA6-200
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA6200 delivers 6 x 218W RMS @ 4 ohms.

£1,285.00


Ecler

NXA6-80

NXA6-80
Powered digital audio manager. Digital matrix, networkable zoning amplifier, with integrated AMIC DSP and remote EclerNet management. The NXA680 delivers 6 x 84W RMS @ 4 ohms.

£919.00


Ecler

WPMMIX-T

WPMMIX-T
2 channel micro-mixer in the standard WPM wall panel format. Unbalanced stereo LINE input with VOL, BASS, and TREBLE controls. Balanced MIC input with phantom power and talkover function. Requires external PSU (WP-PSU model recommended: up to 20 WPMMIXT units could be fed by a single WP-PSU).

£100.00


Ecler

WPmScreen

WPmScreen
The WPmScreen is a remote control panel compatible with all EclerNet products such as MIMO88, NXA and NPA Series. It features a 7" touchscreen and integrated UCP (User Control Panel) client and server hardware.



£609.00


Ecler

WPMVOL

WPMVOL
Remote wall panel control for one output zone of a MIMO54 unit (zone volume). RJ45 standard connector. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface-mount installation box included.

£57.00


Ecler

WPMVOL-IR

WPMVOL-IR
IR to 0-10 V DC interface + IR remote control set. Volume UP, DOWN & MUTE functions converted from IR pulses to VCA voltages. Wall panel blind plate with IR receiver and IR activity LED (green-orange-red). REVO-IR remote control included. Compatible with all Ecler 0-10V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface mount installation box included.

£130.00


Ecler

WPMVOL-SR

WPMVOL-SR
Remote wall panel control for one output zone of a MIMO54 unit (source selection and zone volume). RJ45 standard connector. Volume control compatible with all Ecler 0-10 V DC REMOTE control ports (MPA-R, AMIC, AMPACK, etc.), including the MIMO88 GPI ports. Surface-mount installation box included.

£72.00