microphone accessories

 


Please click the headings to re-order the product listing.

Manufacturer Model- Price

Electrovoice

309A

309A
Suspension shockmount for RE20, RE27N/D, black.

£105.46


Electrovoice

311

311
3/4" stand adaptor for N/D468, RE200B, RE90P, PolarChoice.

£14.90


Electrovoice

314E

314E
Winscreen for 635A, grey, 3/4".

£16.81


Electrovoice

320

320
Stand clamp for RE20, RE27N/D, N/D868, black.

£35.92


Electrovoice

323S

323S
Stand Clamp for EV 1" diameter mics (e.g. RE510, 267A, 367S, 767A), black.

£11.84


Electrovoice

379-1

379-1
Windscreen pop filter for N/DYM microphones, RE16, RE50, N/D967, 767a, 367s, 267a, RE410 and RE510. Black, 1".

£16.05


Shure

A15AS

A15AS
Mic attenuator, 15/20/25dB.

£65.00


Shure

A15BT

A15BT
Bridging transformer, matches devices of different impedances.

£65.00


Shure

A15HP

A15HP
High pass filter -12dB per octave below 100Hz.

£75.00


Shure

A15LA

A15LA
Line to mic adaptor, -50dB attenuation.

£55.00


Shure

A15PRS

A15PRS
Phase reverser, switchable.

£79.00


Shure

A15TG

A15TG
Tone generator - 700Hz mic level signal, switchable.

£209.00


Shure

A85F

A85F
Low to high impedance adaptor, economy, 24dB gain, female XLR - 1/4" phono plug.

£22.00


Shure

A95U

A95U
Low to high impedance adaptor, 24dB gain, male XLR - 1/4" phono plug.

£72.00


Shure

A95UF

A95UF
Low to high impedance adaptor, 24dB gain, female XLR - 1/4" phono plug.

£72.00


Shure

A96F

A96F
Low to medium impedance adaptor, camcorder, 3.5mm mini jack output.

£119.00


Audio Technica

AT8161

AT8161
Metal windshield with additional outer foam.

£64.17


Audio Technica

AT8473

AT8473
Stand clamp - permits attachment of the gooseneck mic base to a standard 5/8 or 3/8 threaded stand or flange.

£25.00


Audio Technica

AT8474

AT8474
Low-profile isolation mount.

£35.00


Audio Technica

AT8615

AT8615
Quick mount plug-in cast metal desk stand; XLRF in, XLRM out.

£78.33


Audio Technica

AT8615RS

AT8615RS
As AT8615 but with on/off mute switch for phantom powered microphones.

£82.50


Audio Technica

AT8646QM

AT8646QM
Shockmount plate with XLRF connector.

£51.67


Audio Technica

AT8647QM/S

AT8647QM/S
Shockmount plate for quick mount microphones with on/off switch for fixed installation.

£91.67


Audio Technica

AT8666

AT8666
Low-profile microphone desk stand.

£85.83


Audio Technica

AT8666RSC

AT8666RSC
Microphone desk stand with switch and external contact closure.

£162.50


Audio Technica

AT8666RSP

AT8666RSP
Microphone desk stand with switch.

£140.83


Rode

BLIMP

BLIMP
Complete windshield and pistol grip system for NTG series shotgun microphones, and all third party shotgun mics up to 425mm in length.

Call for Price

Rode

BLIMP Extension

BLIMP Extension
Extension kit to lengthen Rode BLIMP and allow it to be used with NTG8 and other shotgun miss up to 600mm in length.

Call for Price

Rode

Boom Pole

Boom Pole
Telescopic boom pole. Extends to 3m. Suits VideoMic, NTG1 & NTG2.

Call for Price

Clockaudio

CA900-RF

CA900-RF
Floor Standing 900m Long Shaft. Long Shaft includes Phantom Power Adaptor at bottom end terminated in. Knuckle joint at microphone end terminated with Tini QG 3 pin female. Short shaft connects to SM 155 floor mounting, shock absorbing base (not included).

£169.00


Clockaudio

CAK1-RF

CAK1-RF
Phantom power adaptor with knuckle joint and Tini Q connector.

£119.60


Clockaudio

CH32

CH32
Litetouch Dual Colour Halo Ring & Touch Pad Switch. For use with C003E, C004E, C011E & C012E Boundary Microphone Models (SUPPLIED SEPARATELY). Designed for remote switching. Housing 32 LEDs to give 360° illumination. 12, 24v DC operation. Current consumption 40mA. Retrofittable to all Clockaudio through-table microphones. Fitted with 5 way socket terminal block supplied with fixing screws. Available in white or smoked.

£85.80


Rode

Clip 1

Clip 1
Clip 1 is a cable management clip, designed to allow optimal mounting of MiCon cables on the microphone user. Supplied in a pack of three.

Call for Price

Rode

Clip 2

Clip 2
Discrete mounting clip for Lavalier model. Also known as LavClip. Pack of 3.

Call for Price

Caymon

CMC024

CMC024
Microphone clamp, 24mm diameter.

£3.08


Caymon

CMC033

CMC033
Microphone clamp, 33mm diameter.

£4.03


Electrovoice

CPSM

CPSM
Desk top shock mount for RE90P, PolarChoice.

£25.22


Rode

Custom Pin-Head

Custom Pin-Head
Replacement unpainted mesh head for the PinMic and PinMic Long. Capsule supplied separately.

Call for Price

Rode

Dead Cat

Dead Cat
High Wind cover for VideoMic, NTG1 & NTG2.

Call for Price

Rode

Dead Cat VMP

Dead Cat VMP
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Call for Price

Rode

Dead Kitten

Dead Kitten
High Wind cover for Stereo VideoMic.

Call for Price

Rode

Dead Mouse Pin

Dead Mouse Pin
High wind cover for PinMic and PinMic Long.

Call for Price

Rode

Dead Wombat

Dead Wombat
The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Call for Price

Samson Audio

DMC100

DMC100
3 piece set of drum mic clips, allows for easy clip on microphone rim mounting for most drum and percussion instruments, with adjustable height and swivel.

£26.00


Electrovoice

DRC-1

DRC-1
Drum rim clamp for PL35.

£12.99


Rode

DS1

DS1
Telescopic table stand with height adjustment from 280mm to 400mm. Includes 2 clips for cable securing and 3/8" and 5/8" adaptors.

Call for Price

Audio Technica

ESE-C

ESE-C
Cardioid element only.

£59.17


Audio Technica

ESE-H

ESE-H
Hypercardioid element only.

£59.17


Audio Technica

ESE-ML

ESE-ML
Microline element only.

£80.83


Audio Technica

ESE-O

ESE-O
Omnidirectional element only.

£59.17


Shure

G12-CN

G12-CN
12" gooseneck with attached female XLR connector, chrome.

£27.00


Shure

G12B

G12B
12" gooseneck for 503BG, 515BSL, and 515BSLX - black.

£22.00


Shure

G18A

G18A
18" gooseneck - silver, side exit/entry.

£18.00


Shure

G27B

G27B
27" gooseneck - black.

£27.00


Shure

G6A

G6A
6" gooseneck - silver, side exit/entry.

£17.00


AKG

H30

H30
Universal shockmount.

£45.83


AKG

H85

H85
Universal shockmount for mics with shaft diameters from 19mm to 26mm.

£49.17


Rode

iClamp

iClamp
The iClamp is a heavy-duty clamp designed to provide additional support for your iXY stereo microphone during high movement usage with an iPhone 4 or iPhone 4S.

Call for Price

Rode

InvisiLav 10 Pack

InvisiLav 10 Pack
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation. Pack of 10.

Call for Price

Rode

InvisLav 3 Pack

InvisLav 3 Pack
The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side. Comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation. Pack of 3.

Call for Price

Clockaudio

LB001

LB001

Digital mute switching box allowing pop/noise free muting of a microphone when used with an electronic touch sensor switch, suitable for use with Clockaudio electronic capacitor touch switch models: CH32, TS001, TS002. Standard Tini Q (mini XLR) microphone Input / Output sockets are fitted to the metal case. Tini Q input connector with 0.5 Metre cable to bare end is supplied with the product. Connection to the touch sensor switch is via a Phoenix block. Dip switch is provided inside the unit to allow the standard default of press to mute to be changed to two other formats of latching modes muted or unmuted, and 2 x momentary switching modes with 80 second time out. Requires 12 VDC power adaptor (PS012). Aluminium box construction has a blue power led indicator and red / green status led's.

£175.50


Clockaudio

LB001-PS

LB001-PS
LB001 mute interface box supplied with 12 VDC power adaptor (PS012).

£217.10


Sennheiser

MAS 1

MAS 1
Elegant and low-key in its appearance, the sturdy MAS 1 microphone button makes mic control a breeze. Connected to the MAS 133 inline switch box it can control any XLR-attached microphone by means of programmable microphone activation modes (PTT, PTM, toggle ON/off, permanent on). For easy operation the MAS 1 comes with a bi-color status indicator. Available in black, white or grey.

£65.95


Sennheiser

MAS 133

MAS 133
The MAS 133 is a versatile XLR inline switch box for integrated microphone solutions. Attached between the mic and mixing console, it powers the MAS 1 microphone button. It is able to control any XLR-attached microphone using switchable microphone activation modes (PTT, PTM, toggle ON/off, permanent on). Furthermore, the MAS 133 features a TTL logic, enabling the user to trigger e.g. camera or media control systems for various purposes.

£109.00


Sennheiser

MAT 133

MAT 133
Featuring a rugged housing, the functionally and unobtrusively designed MAT 133 provides a solid ground for XLR3 gooseneck microphones. Black.

£129.00


Sennheiser

MAT 133-S

MAT 133-S
The rugged housing of the functionally and unobtrusively designed MAT 133-S provides a solid ground for XLR-3 gooseneck microphones. A convenient microphone button is featured with a bi color light ring for clear visual feedback. The TTL-logic output serves for various control purposes such as camera control. Black.

£149.00


Rode

MICON Cable 1.2m

MICON Cable 1.2m
1.2m MiCon extension cable for HS1, Lavalier, & PinMic models, available in black or pink.

Call for Price

Rode

MICON Cable 3m

MICON Cable 3m
3m MiCon extension cable for HS1, Lavalier, & PinMic models.

Call for Price

Rode

MICON-1

MICON-1
MiCon adaptor for HS1, Lavalier and Pinmic models. Locking minijack connector compatible with Sennheiser SK500G3, SK300G3, SK100G3, SK500G2, SK300G2 and SK2Freeport.

Call for Price

Rode

MICON-10

MICON-10
MiCon adaptor for HS1, Lavalier, and PinMic models. Provides compatibility with MIPRO transmitters with a 4-pin mini XLR connector.

Call for Price

Rode

MICON-11

MICON-11
MiCon adaptor for HS1, Lavalier, and PinMic models. TRRS connector provides compatibility with iPhone, iPad, iPod Touch and select Andriod devices.

Call for Price

Rode

MICON-2

MICON-2
MiCon adaptor for HS1, Lavalier and Pinmic models. 3.5mm stereo minijack connector (1V minimum power supply).

Call for Price

Rode

MICON-3

MICON-3
MiCon adaptor for HS1, Lavalier and PinMic models. Miniature multipin adaptor compatible with Shure UR1, UR1M, ULX1, SLX1, PGX1, & PG1.

Call for Price

Rode

MICON-4

MICON-4
MiCon adaptor for HS1, Lavalier and PinMic models. Miniature multipin adaptor compatible with Audio Technica UniPak Body-Pack Series 1800, 2000 & 3000.

Call for Price

Rode

MICON-5

MICON-5
MiCon adaptor for HS1, Lavalier and PinMic models. 3-pin XLR connector for 48V phantom power.

Call for Price

Rode

MICON-6

MICON-6
MiCon adaptor for HS1, Lavalier, and PinMic models. Provides compatibility with AKG PT40, PT60, PT81, PT400, PT2000 and PT4000.

Call for Price

Rode

MICON-7

MICON-7
MiCon adaptor for HS1, Lavalier, and PinMic models. Provides compatibility with Lectrosonics SM, Uma, Lma and UM450 systems. 

Call for Price

Rode

MICON-8

MICON-8
MiCon adaptor for HS1, Lavalier, and PinMic models. Provides compatibility with Sony UWP systems.

Call for Price

Rode

MICON-9

MICON-9
MiCon adaptor for HS1, Lavalier, and PinMic models. Provides compatibility with Sennheiser SK 500, SK 2000, and SK 5000 transmitters.

Call for Price

Rode

Mini Boom Pole

Mini Boom Pole
Telescopic boom pole. Extends to 2m. Suits VideoMic, NTG1 & NTG2.

Call for Price

Rode

MINIFUR-HS1

MINIFUR-HS1
High quality miniature furry windshield for Rode HS1. Pack of 3.

Call for Price

Rode

MINIFUR-LAV

MINIFUR-LAV
High quality miniature furry windshield for Rode Lavalier. Pack of 3.

Call for Price

AKG

MPA VL

MPA VL
In line XLR phantom power adaptor for ML & L version microphones.

£60.00


Sennheiser

MZC 30

MZC 30
MZC 30 connecting cable: ultra thin (Ø1mm) with XLR-3M to special coax socket (ME34,35,36). 9 meter length for use with the ME36 in the MZBD 36 boundary adaptor or for ceiling-mounting a capsule above the speaker or the audience. Available in black or white.

£129.00


Sennheiser

MZH 30 B

MZH 30 B
Metal ceiling mount for attaching and directing the ME 34, ME 35 and ME 36 microphone heads. Black.

£12.95


Sennheiser

MZH 30 W

MZH 30 W
Metal ceiling mount for attaching and directing the ME 34, ME 35 and ME 36 microphone heads. White.

£13.95


Sennheiser

MZQ 100

MZQ 100
Microphone clamp for any of the MZH goosenecks, with 3/8" thread.

£23.95


Sennheiser

MZS 31

MZS 31
Shock mount for the MZH goosenecks.

£32.95


Sennheiser

MZT 30

MZT 30
Table mount for gooseneck mics with an XLR-3 connector (MZH 3015, MZH 3040 and MZH 3042).

£17.95


Sennheiser

MZT 30-L

MZT 30-L
Table mount for gooseneck mics with an XLR-5 connector (MZH 3015-L, MZH 3040-L and MZH 3042-L).

£32.95


Sennheiser

MZW 34 Pro

MZW 34 Pro
Foam windshield for ME 34.

£36.95


Sennheiser

MZW 36

MZW 36
Foam windshield for ME 36.

£16.95


Rode

NTRM1

NTRM1
Stand mount for S1.

Call for Price

Rode

NTRM2

NTRM2
Stand mount for NT2A, NT1000, NT2000, NTK, Broadcaster, & Classic II.

Call for Price

Rode

NTRM3

NTRM3
Stand mount for NT3 & NT4.

Call for Price

Rode

NTRM5

NTRM5
Stand mount for NT5.

Call for Price

Rode

NTSM2

NTSM2
Suspension mount for NTK, NT1000, NT2000, NT2A, K2 & Classic II.

Call for Price

Rode

NTSM3

NTSM3
Suspension with hot shoe fitting for NT3, NT4, NT5, & NTG series.

Call for Price

Rode

NTSM4

NTSM4
Suspension with stand mount thread for NT3, NT4, NT5, & NTG series.

Call for Price

Rode

NTSM5

NTSM5
Suspension with camera mount for NT3, NT4, NT5, & NTG series.

Call for Price

Rode

NTSM6

NTSM6
Combined suspension mount and popshield for NT1A, NT1000, NT2A, NT2000, NTK, K2, Podcaster, and Procaster.

Call for Price

AKG

PF80

PF80
Pop filter.

£41.66


Marantz

PHA-3

PHA-3
Portable stereo headphone amplifier.

£141.66


Marantz

Phantom Pack

Phantom Pack
Phantom power supply 48V.

£70.83


Rode

Pin-Back

Pin-Back
Replacement back plate and connector cable for the PinMic.

Call for Price

Rode

Pin-Back-Long

Pin-Back-Long
Replacement back plate and connector cable for the PinMic Long.

Call for Price

Rode

PIN-CAP

PIN-CAP
Replacement low noise omni capsule for PinMic and PinMic Long.

Call for Price

Rode

Pin-Head

Pin-Head
Replacement black mesh head for the PinMic and PinMic Long. Capsule supplied separately.

Call for Price

Rode

Pivot Adapter

Pivot Adapter
The Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.

Call for Price

Samson Audio

PM6

PM6
Power supply for QV10E/QL5/QV/QE/MT350 microphones.

£30.00


Samson Audio

PS01

PS01
Pop filter with nylon mesh screen that reduces vocal popping and sibilance, universal mic stand mounting bracket and  flexible metal gooseneck.

£25.00


Rode

PSA1

PSA1
Spring loaded anglepoise desk stand with 2-axis swivel mount for accurate positioning.

Call for Price

Rode

PSM1

PSM1
Suspension mount for Podcaster.

Call for Price

Rode

RodeGrip

RodeGrip
The RØDEGrip is a multi-purpose mounting solution for the Apple iPhone 5, iPhone 5s, iPhone 5c, iPhone 4 and iPhone 4S. Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.

Call for Price

Rode

RodeGrip+

RodeGrip+
The RØDEGrip+ is a multi-purpose mounting solution with high-quality lens kit for the Apple iPhone 5, iPhone 5s, iPhone 5c, iPhone 4 and iPhone 4S. Featuring a camera-shoe mount with a 3/8" thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. Supplied with three high-quality photographic lenses (2x Telephoto, 180 degree fisheye, wide-macro) that screw into the frame to allow for versatile filmmaking on the iPhone. Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.

Call for Price

Rode

RPS1000

RPS1000
Stocking screen with flexible gooseneck and stand clamp.

Call for Price

Clockaudio

S120

S120
120mm microphone base with M10 screw thread mounting hole.

£71.50


Clockaudio

S120S

S120S
As S120 with press to talk or latching switch.

£78.00


Clockaudio

S120X

S120X
120mm microphone base with 3 pin XLR (F).

£91.00


Clockaudio

S120X5

S120X5
120mm table base with 5 pin XLR.

£102.70


Clockaudio

S120X5-2

S120X5-2
120mm diameter table microphone base fitted with PTT Switch and M10x screw thread mounting hole. Comes with 2m cable, 5 pin XLR male.

£133.90


Clockaudio

S120XS

S120XS
As S120X with press to talk or latching switch.

£117.00


Clockaudio

S133-RF

S133-RF
Microphone base stand with programmable switch and LED. 3 pin XLR in and out.

£130.00


Clockaudio

S135-RF

S135-RF
Microphone base stand with programmable switch and LED. 3 pin XLR in and 5 pin XLR out for remote programming.

£130.00


Clockaudio

S140-RF

S140-RF
Microphone base stand with programmable switch and LED. 3 pin Tini Q in, 5 pin XLR out and integral PPA.

£130.00


Clockaudio

S155-RF

S155-RF
Desk stand with fully programmable touch pad for PTT, PTM & Latching modes. Red led indicator illuminates when a microphone is live.Power requirements: 48 Volt Phantom supply. A male 5 pin XLR plug is provided for input connection and 5 pin female socket mounted on the rear of the product is provided for output connection. Fully protected against RF interference which will eliminate all GSM frequencies from 800-1200 MHz. Finish: satin black.

£165.10


Clockaudio

S210X

S210X
Microphone boom floor stand and boom arm combination with XLR connectors. Ideal for CW9006.

£174.20


Clockaudio

S750

S750
Table top microphone base with knuckle joint and 3m cable.

£109.20


Clockaudio

S80S

S80S
Low profile throuhg table shock mount, black, with either PTT or latching switch & bi-colour LED to confirm status. Available in black or nickel finish.

£119.60


Clockaudio

SA3

SA3
13mm jaw, swivel microphone holder and stand adaptor, 5/8" - 3/8" female thread.

£18.20


Clockaudio

SA5

SA5
28mm jaw, swivel microphone holder and stand adaptor, with 5/8" ~ 3/8" female thread and black rubber finish resistant to damage and microphone scratching.

£18.20


AKG

SA60

SA60
Stand adaptor for straight shaft microphones.

£14.99


AKG

SA61

SA61
Stand adaptor for tapered shaft microphones.

£14.99


AKG

SA63

SA63
Stand adaptor.

£19.16


Electrovoice

SAPL-1

SAPL-1
Microphone stand adaptor for all PL series vocal microphones.

£9.93


Electrovoice

SAPL-2

SAPL-2
Microphone stand adaptor for PL33 (also fits RE20, RE27N/D & N/D868).

£24.45


Electrovoice

SAPL-3

SAPL-3
Isolating shock mount stand adaptor for PL37.

£9.17


Rode

SC2

SC2
The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use. It is ideal for connecting the output of an Apple iPhone using a RØDE iXY microphone to a DSLR or video camera for capturing scratch audio to camera while the iPhone records the broadcast-quality track.

Call for Price

Rode

SC6

SC6
The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback. With the SC6 users can monitor audio from the smartLav, as well as input two smartLavs into the one mono channel in interview or dual-dialogue scenarios. (Note that the two microphone inputs will be recorded to the same channel).

Call for Price

Clockaudio

SM10

SM10
Low Profile Thru-table Shock Mount with 3 pin female XLR input and 3 pin male XLR output, manufactured in high quality brass.

£70.20


Clockaudio

SM110

SM110
Shock absorbing table stand with SA3 microphone holder.

£45.50


Clockaudio

SM155

SM155
Floor mounting shock absorbing microphone base for CA900 & CA700, diameter of 15mm and height of 42.5mm.

£113.10


Clockaudio

SM20-RF

SM20-RF
Low profile, through-table shock mount. RF immunity. Integral PPA. 3 pin m/Tini Q to XLR. Black nextel.

£117.00


Clockaudio

SM70

SM70
Low profile, surface fitting shock mount. Matt black.

£31.20


Clockaudio

SM75

SM75
Shock absorbing base for fitting above or below the surface.

£96.20


Clockaudio

SM80

SM80
Through-table microphone mount with protective flip cover. 3 pin XLR. Available in black or satin nickel.

£145.60


Clockaudio

SM80-RF

SM80-RF
Through-table microphone mount, RF immune, with protective flip cover and integral PPA. 3 pin XLR. Available in black or satin nickel.

£226.20


Clockaudio

SM80S

SM80S
Through-table shock mount flip cover, either PTT or latch switch and LED, 3 pin XLR. Available in black or satin nickel.

£163.80


Clockaudio

SM80S-RF

SM80S-RF
Recessed microphone shock mount with flip lid and switch. Available in black or satin nickel.

£263.90


Clockaudio

SM93

SM93
Surface fitting microphone shock mount, with 3 pin F-XLR, screw terminals.

£37.70


Clockaudio

SM95

SM95
As SM93 with 5 pin F-XLR.

£37.70


Rode

SMR

SMR
Shock mount with Rycote designed lyre suspension with removable all metal pop filter. Fits NT1, NT1A, NT2A, NT1000, NTK, and K2

Call for Price

Samson Audio

SMS1

SMS1
Shock mounted flange mount, for CM15P and CM20P.

£10.59


Samson Audio

SP01

SP01
Spider mount for C01, C03, CL7, CL8 and C01U condenser mics.

£52.94


AKG

ST45

ST45
Low profile table stand.

£57.50


AKG

ST46

ST46
Miniature table stand.

£41.66


Rode

Stereo VideoMic Bag

Stereo VideoMic Bag
The SMV Bag is designed to carry the Stereo VideoMic along with spare batteries, shock mount bands and other small accessories. It features an adjustable and removable strap, belt loops, and is made from durable neoprene.

Call for Price

Rode

Stereobar

Stereobar
The Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8” mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RØDE K2.

Call for Price

Rode

Tripod

Tripod
A collapsible mini tripod designedfor mounting lightweight microphones that support 1/4" mounting. The tripod allows you to mount the microphone on any surface that will give you a concentrated and centralized location for picking up sound. It provides 360 degree rotation and a wide angle of vertical adjustment.

Call for Price

Clockaudio

TS001

TS001
Touch Sensitive Switch with Bi-Colour LED Halo, designed for remote switching, housing 10 LEDs to give all round illumination. 12 or 24v DC operation, current consumption 40mA. Supplied with 5 core ribbon cable + connector. Available in white or opaque finish. The TS001 allows users to easily identify the status of Microphones, as well as mute the units for privacy. With no moving parts, the switch is touch-sensitive, so there are no clicking noises when switching from one status to another. Both the switch and the Halo have been designed to operate remotely with all popular brands of electronic system control, so an integrator has complete freedom to assign function and LED colour.

£96.20


Rode

Universal BLIMP Mount

Universal BLIMP Mount
Boompole/Boomstand mounting adaptor for BLIMP.

Call for Price

Rode

Vampire Clip

Vampire Clip
The Vampire Clip is a double-toothed clothing pin that conveniently fastens the Lavalier microphone onto a wide range of fabric and clothing for complete mounting versatility. Pack of 3.

Call for Price

Rode

VC1

VC1
The VC1 is a 3m (10') 3.5 mm stereo audio extension cable, featuring two core shielding and a gold plated jack and socket. It is ideal for use to connect a Rode VideoMic, Stereo VideoMic or VideoMic Pro when the microphone is mounted on a boompole, or away from the camera or recorder. The VC1 can also be used as a high quality headphone extension cable.

Call for Price

Rode

Violin Clip

Violin Clip
The Violin-Clip suspension mount is designed to easily clamp onto the strings of a violin in the bridge area behind the top plate, allowing for the precise mounting of the Lavalier microphone.

Call for Price

Rode

VXLR

VXLR
Stereo 3.5mm mini jack to XLR converter. Suits VideoMic 

Call for Price

AKG

W 23

W 23
50mm foam windscreen for ball head microphones.

£20.00


AKG

W 30

W 30
Foam windscreen for use with CK 31, CK 32 and CG 33.

£6.75


AKG

W 32

W 32
Foam windscreen 18-20mm for use with CK 61 ULS etc.

£10.00


AKG

W 77 M

W 77 M
Black wire mesh windscreen for use with CK 77 WR. C477 WR and C577 WR.

£35.00


Clockaudio

W2

W2
Windsheild for C2 & C3 series.

£9.10


Clockaudio

W8

W8
Windsheild for C800 series.

£14.30


Clockaudio

W85

W85
Windshield for C850E shotgun microphone.

£27.30


Rode

WS-HS1B/P

WS-HS1B/P
High quality pop filter for Rode HS1-B/P. Available in pink or black. Pack of 3.

Call for Price

Rode

WS-LAV

WS-LAV
High quality black pop filter for Rode Lavalier. Pack of 3.

Call for Price

Samson Audio

WS03

WS03
Windscreen.

£5.00


Samson Audio

WS1

WS1
5-pack of foam windscreens, greatly reduces occurances of popping and wind noise and  fits many popular handheld microphones.

£12.00


Rode

WS2

WS2
Windshield for NT1A, NT2A, NT1000, NTK, NT2000, K2 and Broadcaster.

Call for Price

Rode

WS3

WS3
Windshield for NT3.

Call for Price

Rode

WS4

WS4
Windshield for NT4.

Call for Price

Rode

WS5

WS5
Windshield for NT5.

Call for Price

Samson Audio

WS5E

WS5E

Headset foam windscreens (5-pack, multi-colours), greatly reduces occurrences of P-popping; fits many popular headset microphones (including Samson Qe, Qv).

£9.50


Rode

WS6

WS6
Deluxe windshield for use with NTG-1 and NTG-2 shotgun mics.

Call for Price

Rode

WS7

WS7
The WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.

Call for Price

Rode

WS8

WS8
The WS8 Deluxe Windshield is an easy to use high-performance windshield for RØDE's most popular small diaphragm condenser microphones, the NT5, NT55 and NT6. Designed to reduce wind noise when recording in adverse environmental conditions, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. The WS8 supports microphones of 20mm diameter and 27mm capsule depth.

Call for Price

Electrovoice

WSPL-1

WSPL-1
Foam windscreen (black) for PL24, PL24S, PL44, PL80A, PL80C, PL84, PL84S.

£9.93


Electrovoice

WSPL-2

WSPL-2
Foam windscreen (black) for PL33 (also fits RE20 & RE27N/D).

£9.93


Electrovoice

WSPL-3

WSPL-3
Foam windscreen (black) for PL35.

£9.93


Electrovoice

WSPL-4

WSPL-4
Foam windscreen (black) for PL37 (also fits RE200).

£9.93


Rode

WSVM

WSVM
 
The WSVM windshield provides additional protection for the microphone capsule against any wind noise or plosives.

Call for Price

Samson Audio

XFM1

XFM1
XFM1 - XLR flange mount with cable, for CM15P and CM20P.

£22.00


Beyer

ZSH 210

ZSH 210
Base plate for Revoluto microphone MPR210/211, 5/8" with threaded adaptor 3/8", black.

£35.57